一种最优控制的胞映射算法

由Hsu提出的利用胞映射进行最优控制的方法可以发展成实用的工程控制技术.本文以研究算法为出发点,利用胞映射的特性,结合实际的计算与可能,作了一系列旨在提高计算速度和节省内存的改进;并给出了简单有效的区分同耗最优控制对的统一的方法.使用平常的微型计算机也能有效地解决实际工程问题的最优控制.     

建筑结构最优阻尼及最优配置研究

利用阻尼来抗震是建筑物最简单的抗震方法,当在阻尼数目少于楼层数时,为使所布置的阻尼达到最优的抗震效果,本文开发了两种最优阻尼配置方法。第一种方法是根据临界激励法确定计算所有可能布置位置中的临界阻尼,选择最小的临界阻尼位置作为最优配置。第二种方法则是根据给定阻尼,计算最优控制效果以确定最优阻尼配置。然后根据实代码遗传算法,在结构抗震效果基本保证的前提下,寻找最优阻尼以降低结构总的阻尼增量。最后给出了一个计算实例。     

Minimization of the Wing Airfoil Drag Coefficient Using the Optimal Control Method

The problem of designing a wing airfoil starting from the surface velocity (or pressure) distribution, given in multi-parameter form, is considered. In the diffuser region, the velocity decrease law is determined from the conditions of minimum drag and separationless flow for a given Reynolds number. The case of boundary layer suction for the purpose of improving the aerodynamic characteristics of the airfoil is studied. A solution is obtained using optimal control theory.     

Optimal Transitions of a Spacecraft with an Energy Storage and a Low-Power Thruster

A solution is found to the problem on optimal transitions of a spacecraft with a low-power thruster and an energy storage between two close noncoplanar circular orbits. The maximum payload is chosen to be the optimality criterion. The optimal time-dependences of controls and optimal relationships among the mass parameters of the propulsion system are presented. Ranges of these parameters are found within which an energy storage would be appropriate for use. The results are compared with those for a constant-power thruster. The effect of the radial increment and the increment in the orbit inclination angle on the efficiency of the energy storage is studied     

THE OPTIMAL CONTROL VARIATIONAL PRINCIPLE AND FINITEELEMENTS ANALYSIS FOR VISCOPLASTIC DYNAMICS

I.Viscoplastic-DynamicsConstitutiveRelationThestructurematerialwouldarisesimultaneouslytheelasticity,viscosityandplasticityindynamichighstraincondition.Atpresent,theovcrstressmodel,viscoplasticitymodel,quasi-linearconstitutiverelationtheoryandintrinsicvar…     

建筑风压数值模拟的几种并行化策略

针对四个处理机的Ｔｒａｎｓｐｕｔｅｒ并行计算机系统，建立了建筑风压数值模拟问题基于ＳＩＭ－ＰＬＥＣ算法的几种并行化策略：分区并行策略、方程并行策略和双重并行策略。对各种策略的计算流程、数据通讯及并行效率等进行了分析和比较，并通过实例计算作了验证。     

Thermocapillary convection in an absorbing-scattering medium subjected to irradiation

The criteria for the onset of thermocapillary convection in a horizontal radiating fluid layer heated by an incident thermal radiative energy source are determined. The fluid layer is an absorbing and isotropically scattering medium confined between a free upper surface and an insulated rigid lower surface. Linear analysis is performed on the continuity, momentum, energy, and approximate radiative equations. The resulting disturbance equations are solved using a numerical optimization technique to obtain the eigenvalues governing the onset of convective motion. The influence of thermal radiation on the critical Marangoni number is examined. Attention is drawn to the physical significance of the heat transfer mode, gravitational force, the scattering effect, and the surface radiative properties. The conditions leading to the onset of convection are presented as functions of the optical thickness, scattering albedo, Planck number, surface emissivities, and transmissivities.     

超静定型钢桁架优化设计的面积比法

满应力准则是对超静定型钢桁架进行优化设计的有效方法．但这种方法的主要缺点在于收敛速度很慢甚至不收敛,这给设计工作带来很大的不便．对问题进行了研究,在“型钢压杆稳定设计直接法”的基础上,提出了满应力优化设计的一种新方法——面积比法,有效地提高了设计过程的收敛速度,降低了设计成本,供有关结构设计人员参考．     

结构的多机并行分析I——结构的并行有限元方法

本文详细分析和讨论了结构分析的并行有限元方法—并行预处理共轭梯度法(以下简称PPCG法)。着重讨论了基于自带存储器的多处理机系统的并行预处理算法问题,并由此提出了两种PPCG法:PPCG1和PPCG2法。这两种方法适用于以单道剖分(one-way dissection)的子结构法为基础的并行分析。由于这种剖分法产生的结构刚度矩阵具有箭头形状,可独立地消除各子结构的内部自由度,并且不会在刚度矩阵中产生新的非零元素,因此很适合具有较多处理机的并行机系统对复杂结构进行的并行分析。     

线性时滞系统的离散最优控制

介绍了对线性时滞系统进行最优控制的设计，将具有时滞控制的线性系统离散后引入增广状态向量。获得不显含时滞的差分方程，根据时滞量的两种分类情况采用连续和离散形式的性能指标函数导出了最优控制律。控制律包含当前状态和此前若干步状态向量的叠加，最优控制律直接从时滞方程中得到，可保证系统的稳定性，此方法亦适用于大时滞的情况。数值算例验证了控制策略的有效性。